Table of Contents
Advertisement
14
Remove all adhesive tapes and these tapes are located around the edges of the back
cover ( ).
Be careful not to put your fingertips or any foreign objects on the rear camera or
•
back cover lens ( ).
Make sure to remove any residual tape ( ) attached to the inside of the back
•
cover before reassembling the device.
Be careful not to damage the near components.
•
Apply additional heat with a microwaveable heating bag if you are having trouble
separating the adhesive.
After you finish disassembling, refer to
reassemble.
Disassembly and Assembly
Back Cover Assembly
for how to
67
Advertisement
Table of Contents
