Cisco Linksys WPC54G Quick Installation page 83

2
Set Up the Adapter
The Available Wireless Network
screen offers three setup options.
• Available Wireless Network.
Most users should use this
option. The networks available
to this Adapter will be listed on
this screen. You can choose
one of these networks and
click Connect to connect to it.
Click Refresh to update the
Available Wireless Network list.
• SecureEasySetup. If you used
SecureEasySetup to set up
your network, click the
SecureEasySetup Push Button.
Follow the on-screen prompts.
• Manual Setup. To set up the
Adapter manually, select
Manual Setup.
Follow the instructions for the option
you are using.
Setting Up the Adapter with an
Available Network
The available networks are listed in
the table by SSID. Select the wireless
network you wish to connect to and
click Connect. If the network uses
wireless security, you will need to
configure security on the Adapter. If
not, you will be taken directly to the
Congratulations screen.
Later you can use this
NOTE:
screen again to set up
configuration profiles with
settings for different networks.
3