Black & Decker BEH550 Original Instructions Manual page 7

For drilling in steel, wood and plastics or for screw driving
u
set the operating mode selector (4) to the
Accessories
The performance of your tool depends on the accessory used.
BLACK+DECKER accessories are engineered to high quality
standards and designed to enhance the performance of your tool. By
using these accessories you will get the very best from your tool.
Maintenance
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new plug.
u
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.Products and batteries contain
materials that can be recovered or recycled reducing
the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
r
Technical data
position.
Voltage
Rated power
No-load speed
Impact rate
Weight
Max. drilling capacity
Concrete
Steel
Wood
BEH550 Vibration total values (triax vector sum) according to EN 62841:
BEH710 Vibration total values (triax vector sum) according to EN 62841:
BLACK+DECKER declares that these products described
The Supply of Machinery (Safety) Regulations, 2008, S.I.
These products also conform to the following UK Regulations:
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
(Original instructions)
V
AC
W
min
-1
min
-1
kg
mm
mm
mm
BEH550 Level of sound pressure according to EN 62841:
Sound pressure (L ) 96.5 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L ) 104.5 dB(A), uncertainty (K) 5 dB(A)
WA
BEH710 Level of sound pressure according to EN 62841:
Sound pressure (L ) 98.5 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L ) 106.5 dB(A), uncertainty (K) 5 dB(A)
WA
Impact drilling into concrete (a ) 14.8 m/s
h, ID
Drilling into metal (a ) 1.8 m/s
h, D
Impact drilling into concrete (a ) 16.2 m/s
h, ID
Drilling into metal (a ) 1.9 m/s
h, D
Declaration of conformity
The Supply of Machinery (Safety)
Regulations 2008
BEH550, BEH710 Impact Drill
under "technical data" are in compliance with:
2008/1597 (as amended),
EN 62841-1:2015+A11:2022,
EN 62841-2-1:2018+A11:2019+A1:2022+A12:2022
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
2012/3032 (as amended).
ENGLISH
BEH550 Type2 BEH710 Type2
230 230
550 710
0 ~ 2800 0 ~ 2800
0 ~ 47600 0 ~ 47600
1.7 1.76
13 13
13 13
25 25
2 2
, uncertainty (K) 1.5 m/s
2 2
, uncertainty (K) 1.5 m/s
2 2
, uncertainty (K) 1.5 m/s
2 2
, uncertainty (K) 1.5 m/s
7