2022/03/29 23:35:15 (GMT+09:00)
APPENDIX
Withdrawal of 41P/51P FFC using Non-ZIF (IPEX connector)
Initial condition
Withdrawal of 41P/51P FFC using Non-ZIF (Molex connector)
Initial condition
TOOLS & EQUIPMENTS
FFC PRECAUTIONS
Step 1
PRESS
1
PRESS
1
Step 1 & 2
1
PUSH
2
PULL
1
PUSH
SECTION 1
SECTION 2
Step 2
1
2
1
PULL
Caution
Ensure fingers does NOT touch
parts on board and tuner connector
when pushing the side locks.
SECTION 3
SECTION 4
FFC REPLACEMENT CAUTIONS
Press the release lock button downward
1
at same time (highlighted in red).
Pull FFC in straight direction while
pressing
2
both release lock button at the same time.
Note: FFC as in image is only for
reference purpose. Actual FFC outlook
may vary by each vendor.
Push the side-release lock buttons inward
1
(highlighted in red).
Pull-out FFC in straight direction while
2
pushing side-release lock buttons at the
same time.
Note: FFC as in image is only for reference
purpose. Actual FFC outlook may vary by
each vendor.
SMART CORE
APPENDIX
84
SYS SET