Related Manuals for Frossvt EM3205
Summary of Contents for Frossvt EM3205
- Page 1 Frossvt Espresso Coffee Machine User Manual Item EM3205 Voltage 120 V Frequency 60 Hz Power 1350 W Water tank 1.8 L Pump 20 Bar Pressure Made in China...
- Page 3 Before the First Use （Important） 1. Move the coffee maker from the package, and check the accessories according to the list； 2. Remove the tank cover and remove the tank, then remove the red silicone from the water tank before using the coffee maker （Note: If the red silicone piece is not removed, the machine will be unable to pump water）...
-
Page 4: How To Make A Good Cup Of Coffee
How to Make a Good Cup of Coffee Grinding coffee bean and grinding quality largely determines the quality of coffee, if the powder is too coarse, coffee extract inadequate, the taste is light, and color is lighter, the cream also will be very thin, and color is white; if the powder is too fine, coffee over extraction, it will be too dark, and no cream. - Page 5 approx. 16-16.5g, and tamp down firmly with a powder press; The surface of pressed coffee powder should be about away from the edge of the filter cup (important indicator). Too high or too low will affect the extraction pressure and effect of coffee, please reduce or increase the amount of coffee powder;...
- Page 6 Accessories： 1.Water tank cover 2.Water tank 3.Steam knob 4.Main body 5.Steam pipe and nozzle 6.Steam pipe handle 7.Warm cup board 8.Spoon & Tamper 9.ON/OFF switch/ indicator 10.Single-cup coffee switch / indicator 11.Double-cup coffee switch / indicator Display screen 12.Steam warm-up switch / indicator 14.Piezometer 15.Single-cup coffee filter 16.Double-cup coffee filter...
- Page 7 Instructions： Steam/Water knob ”Power button, after the machine is powered on, the indicator light is “ steady on, touch the power button once to start preheating---the " " button indicator light is always on during the preheating process, “ ”...
- Page 8 coffee after preheating, Automatically extract until the machine stops working or press the button again to stop working during the extraction process. (During the extraction process, " " breath flashes(white), and the buzzer beeps when the extraction is over, and the indicator light turns to steady on white) ”Steam preheat button: touch this button and the indicator blinks in ...
- Page 9 MAKE ESPRESSO COFFEE（Double-cup Coffee for example） 1. Open the lid, take out water tank, and fill the water tank with up to 1.8 liters of cold, preferably filtered water. Do not exceed the MAX capacity; 2. Put back the water tank and close the lid; 3.
- Page 10 6. Put cup(s) under coffee outlet; 7. Touch the coffee double-cup coffee switch, the machine starts pumping water, and coffee flows out of the coffee nozzle; 8. The coffee machine automatically stops working (the light from Flashing to a constant light), and the coffee is made at this time, then remove the coffee cup;...
- Page 11 MAKE CAPPUCCINO (How to texture Milk) 1. Prepare espresso first with a large enough cup according to part “B”; 2. Take a steel frothing jug (IMPORTANT: Make sure the frothing jug is cold before texturing milk. Refrigerate or run cold water into the jug before use), pour into about 8℃...
- Page 12 9. Texture the milk until sufficient volume is obtained. 10. When the milk temperature reaches between 60-65℃, it is finished. 11. Turn off steam BEFORE taking the tip out of the milk. Wipe the steam wand with a clean wet towel. 12.
-
Page 13: Making Hot Water
Making Hot Water 1. Put a container under hot water outlet; 2. When the single and double cup coffee indicator light is on, turn on the steam knob switch, hot water flows out of the steam nozzle, and the single cup coffee indicator and double cup coffee indicator flashes during the process of making hot water;... - Page 14 Indicator Tips Single- Double- ON/OFF Steam Cause Solution Indicator Coffee Coffee Indicator Indicator Indicator Lights Lights Lights Lights off Power on Coffee and Lights on Flashing Flashing Lights off hot water is pre-heating Coffee and hot Lights Lights on Lights on Lights off water pre-heating...
- Page 15 temperature steam is too high) button to making hot water quick cooling Standby for Touch Lights Lights Lights Lights off more than display 30 minutes switch The steam knob is not Tighten Flashing Lights Quickly Lights on Lights off closed the steam tightly when knob...
-
Page 16: Troulbe Shooting
Troulbe Shooting Problem Cause/Result Solution Water tank is empty Pour water in water tank The input voltage or Make sure the voltage and No water frequency is inconsistent frequency is consistent with comes out with nameplate the nameplate Please contact with the Machine malfunctions authorized service Steam nozzle clogged... - Page 17 Used skimmed milk Use whole milk *If you have not been able to solve the problem, please contact us via E-mail : frossvt@dg-sunrise.com or Amazon message. Content of hazardous substances in the product Hazardous Substances Accessory (Pb) (Hg) (Cd) (Cr(VI))
-
Page 18: Cleaning Mineral Deposits
Cleaning Mineral Deposits 1. The machine builds up lime scale deposits over time, and you need descale the machine 2-3 months; 2. Pour water and descale in water tank up to MAX capacity (water and descale ratio is 4:1, follow the instruction of descale. Please use “household descale”, or you can use the citric acid replace descale (water and citric acid ratio is 100:3);... -
Page 19: Clean And Maintenance
Clean and Maintenance 1. The machine has to be switched off and cooled down; 2. Use a clean damp cloth to clean the stainless steel surface; Note: Do not use abrasive sponges and alcohol or solvents. Do not immerse the machine into water. 3. - Page 20 Cleaning Mineral Deposits 9. The machine builds up lime scale deposits over time, and you need descale the machine 2-3 months; 10. Pour water and descale in water tank up to MAX capacity (water and descale ratio is 4:1, follow the instruction of descale. Please use “household descale”, or you can use the citric acid replace descale (water and citric acid ratio is 100:3);...
-
Page 21: Environment Friendly Disposal
Environment Friendly Disposal You can help protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipments to an appropriate waste disposal center. - Page 22 There are no user serviceable parts. Follow these steps if the unit fails to operate: 1. Check the instructions have been followed correctly. 2. Check that the mains supply is functional. 3. If the appliance will still not operate, please contact us： Customer Service: frossvt@dg-sunrise.com...
- Page 24 Manufacture: FROSSVT Brands Inc Customer Service: frossvt@dg-sunrise.com...
Need help?
Do you have a question about the EM3205 and is the answer not in the manual?
Questions and answers