Sony STR-DE185 Operating Instructions Manual page 27

If the factory settings of the FUNCTION
buttons do not match your system components,
you can ch_mge them. For example, if you have
a tape deck and you do not have _m MD deck,
you can assign the MD/TAPE button to your
tape deck.
Note that the settings of the TUNER button
cannot be changed.
t Hold down the Function button whose
function you want to change (for
example, MD/TAPE).
2 Press the corresponding button of the
component you want to assign to the
Function button (for example, 4 - Tape
deck).
The lbllowing buttons _tre assigned to select
the l_nctions:
TO operate Press
CD player 1
DAT deck 2
MD deck 3
Tape deck A 4
Tape deck B 5
LD player 6
VCR (command mode VTR I *) 7
VCR (command mode VTR 2*) 8
VCR (command mode VTR 3*) 9
TV 0
DSS (Digital Satellite Receiver) >10
DVD ENTER
VCD player
* Sony VCRs are operated with a VTR !, 2 or 3
setting. These correspond to Bela, 8MM and
VHS respectively.
Now you can use the MD/TAPE button to
control the tape deck.
To reset a button to its factory
setting
Repeat the above procedure.
To reset all the function buttons to
their factory setting
Press I/Q), AV I/_) and MASTER
VOL - at
the same time.
g
t_
o
m_
m
o
27 cB