Sony STR-DE185 Operating Instructions Manual page 11

AC OUTLET*
F
r_[*lffl]l_|
AC power cord
To awalloutlet
* The configuration and shape of AC outlets vary
according to the model and countt2¢ to which the
receiver is shipped.
Connecting the AC power
cord
Connect the AC power cord(s) of your audio/
video components to a wall outlet.
Caution
Make sara that tile total power consumption of the
component connected to the receiver's AC OUTLET
does n_ exceed the wattage stated on the rear panel.
Do not connect high+wattage electrical home
appliances such as electric irons, falls, or TVs to this
outlet.
Note
If tile AC power cord is disconnected for about one
week, the receiver's entire memory wil! be cleared.
Before using your receiver lbr the first time, or
when you w_mt to clear the receiver's memory,
do the following.
1
Turn off the receiver.
2 Hold down I/_ for 5 seconds.
"INITIAL" appet_rs in the display and all of
the following items we reset or cleared:
• All preset stations are reset or cletwed.
• All index names (of preset stations and
program sources) are cletwed.
• The master volume is set to VOL MIN.
• All adjustments made (BALANCE,
speaker system, etc.) t_re reset to factory
settings.
Z
O
O
II
€
O
3
I;
o
o
If you connect other audio/video components to
the AC OUTLET on the receiver, the receiver
will supply power to the connected component,
allowing you to turn the whole system on or off
when you turn the receiver on or off+
11 G8