Table of Contents
Advertisement
TX-3000
SPECIFICATIONS
AMPLIFIER SECTION
Output Power:
45 watts per channel, min. RMS,
Signal-to-Noise Ratio:
Mono:
70 dB
at 8 ohms both channels driven,
Stereo:
65 dB
from 20 Hz to 20,000 Hz, with
Alternate Channel Att:
60dB
no more than 0.04% total
AM Suppression Ratio:
52 dB
harmonic distortion.
Harmonic Distortion:
Mono:
0.15%
Total Harmonic
Stereo:
0.3%
Distortion:
0.04% at rated power
Frequency Response:
30 Hz — 15,000 Hz (41.5 dB)
0.04% at 1 watt output
Stereo Separation:
40 dB at 1 kHz
IM Distortion:
0.1% at rated power
.
30 dB at 100 Hz — 10,000 Hz
0.04% at 1 watt output
Muting Level:
14.7 dBf, 3 uV
Damping Factor:
40 at 8 ohms
Stereo Threshold:
14.7 dBf, 3 pV
Frequency Response:
20 Hz — 30,000 Hz (+1 dB)
Servo Lock Level:
14.7 dBf, 3 pV
RIAA Deviation:
Sensitivity & Impedance:
20 Hz — 20,000 Hz (+0.8 dB)
Phono:
2.5 mV, 50 kohms
Tape Play: 150 mV, 50 kohms
AM:
Tuning Range:
325 — 1,620 kHz
Tape Rec:
150 mV, 3.5 kohms
Usable Sensitivity :
2) wv
(PH) |
Image Rejection Ratio:
45 dB
Phono Overload:
180 mV r.m.s. at | kHz, 0.04%
IF Rejection Ratio:
30 dB
THD.
Signal-to-Noise Ratio:
40 dB
Signal-to-Noise Ratio:
Phono: 85 dB (at 10 mV input
Harmonic Distortion:
0.8%
IHF A weighted)
GENERAL
_ 65 dB CHF C weighted) power Supply:
AC 120 volts, 60 Hz (D model)
Tape: 95 dB (IHF A welgnen
AC 220 volts, 50 Hz (G model)
|
|
90 dB (IHF C weighted)
AC 220/120 volts, 50/60 Hz
Residual Hum & Noise:
0.8 mV at Volume Control: min.
Tone
Controls:
Bass:
+12 dB at 100 Hz
(W model)
one
WONMTONS:
ss ;
+12
d
10 ki
Outputs:
Speaker A & B, Phones, Tape
—_
Treble:
7 oB at 10 k H z
Rec Out 1 & 2, AC Outlet (x 2)(D model)
High Filter:
6 kHz (6 dB/oct)
Inputs:
Phono, Tape Play | & 2
Loudness (—30 dB):
+9 dB at 40 Hz
FM and AM An tennas
+5 dB at 20 kHz
Antennas:
FM:
300 ohms balanced and
75 ohms unbalanced
TUNER
SECTION
AM: _ built-in ferrite core
FM:
antenna and external
Tuning Range:
88 — 108 MHz (D model)
terminal
87.5 MHz — 108 MHz
Semiconductors:
I FET, 20 transistors, 11 ICs,
(G/W model)
38 diodes (D & W model)
Usable Sensitivity:
Mono:
11.2 dBf, 2 uv
1 FET, 22 transistors, 11 ICs,
Stereo:
19.2 dBf, 5 uV
38 diodes (G model)
50 dB Quieting
Dimensions (W x Hx D):
480 x 130 x 376mm
Sensitivity :
Mono:
17.2 dBf, 4 uV
19" x 5-1/8" x 14-13/16"
Stereo:
37.2 dBf, 40 uv
Weight:
11.4 kg, 25.1 Ibs
Capture Ratio:
1.5 dB
Image Rejection Ratio:
60dB
Specifications and features are subject to change without notice.
IF Rejection Ratio:
85 dB
Spurious Rejection Ratio: 85 dB
COMPONENT LOCATION
slowole
©) |) \& |G ©
Wht
Back View
Advertisement
Table of Contents
