Advertisement
Disassembly and Reassembly
4-3-2 Terminal Board
Removal
1. Pull the power cord to the left and remove it.
2.
Remove 2 screws ®.
3. Lift up the 2 brackets ®). Separate the terminal board from the chassis mount.
4.
To reassemble, refer to Fig. 4-6.
TERMINAL-BOARD
HOLDER-CHASSIS
$ Cort Jack
S-VHS Jack
Fig. 4-5
Insert
"L
stuff on the left and right bottom of the terminal board to
"hole on the holder chassis.
Fig. 4-6
4-4
Samsung Electronics
Disassembly and Reassembly
4-3-3 PCB
Removal
Pe
No
Refer to the Fig. 4-4
Disassembly
1.
2.
replaced.
4-3-4 SNAPIN Removal
SNAPIN-CONTROL
Advertisement
