Timer Programming - Panasonic Omnivision PV-C2023 Operating Instructions Manual

Yeu can set up to 8 programs to be recorded while you are
away.
Press PROG to display SET PROGRAM screen.
t) Press h,V to select
TIMER
PROGRAMMING.
2) Press • to display
screen.
• if a program is already in
memory, pressAV, and • to
select an unused program
number.
3
Press Ay to select and
• or <ll to set the
_ecording DATE.
1~31 = One time
• _AtLY = MON-FR/
• WEEKLY SUN-SAT
= Same time once a week
Example (,+8--9 ........ 31-- 1 --2--.--6"_ I
Today's 7 SELECT A / • Selection Older DAILY
Date L.WEEKL¥ ...... W EEKLY WEEKLYJ
-- (SAT) (MON) (SUN)
Repeat step 3 to set:
Start time, Stop time
• Channel (or UNE for outsidesource)
• Speed (SP, LP, SLP)
Press PROG to
end the program.
To Enter More Programs,
press A_ to select
and • to set a blank
program number, and
then repeat step 3
Press
PROG twice to exit this mode.
• If you're using a cable box, make sure that it is tuned
to the desired channel and the power is left on for timer
recording.
• PROG TIMER indicator lights on the unit.
_ Ready
Check List
[_ M connections are made.
[_ Your unit is plugged in.
[_ The clock is set to correct time.
The tape is long enough.
[_ The record tab is in plase.
PROG TIMER indicator
22