Panasonic KX-TCD725AXM Service Manual page 60

KX-TCD725AXM
Address Default
0F14 FF
0F15 0A
0F16 66
0F17..1BB FF..FF
15.3.7. Clip configuration
Address Default
0F37..38 3D 00
Name
AgcUpdateTime
LineSeizureTime
InitDialPause
Reserved[5]
Name
Parse.Configuration
Type
Line AGC update time. The period of time between each
line AGC update. If FFh, line-AGC is disabled. If used
recommended value is 64h (1 sec).
Unit : 10ms, min/max: 10/FF, Defaults to disabled.
Line seizure time. The period of time that the PSTN line
or the PSTN HW needs after the hook-switch is activated
in order to be ready. During this period audio is muted.
700/705: Only used during outgoing calls or if the
special-line seizure mode is enabled (Cfg:6).
715/25/35: Always used.
Unit : 10 ms,, min/max: 01/FF. Defaults to 100 ms.
D Init-dial-pause. Dial pause inserted after hook-off when
making an outgoing call.
Bit 0..3: init dial pause if PULSE dial-mode. If 0fH then
normal dial-pause is used.
Bit 4..7: init dial pause if DTMF dial-mode. if 0fH then
normal dial-pause is used.
Unit : 500 ms, min/max: 00/0F. Defaults to 3 sec and 3
sec.
D
Type
D Clip parse set configuration
Bit
0: Etsi: 1=enable 0=disable
1: ForwardNumber: 1=enable 0=disable
2: Danish: 1=enable 0=disable
3: Dutch: 1=enable 0=disable
4: Canadian: 1=enable 0=disable
5: Swedish: 1=enable 0=disable
6: UserDefined: 1=enable 0=disable
7: KPN vmwi: 1=enable 0=disable
8: Reserved8
9: Reserved9
10: Reserved10
11: Reserved11
12: Reserved12
13: Reserved13
14: Reserved14
15: Reserved15
60
Description
Description