Removal Of Rear Panel; Removal Of Right Side Panel - Whirlpool JennAir JJW6024HM Technical Manual

Removal of Rear Panel

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Remove the four (4) screws which holds the rear panel and
then, remove the rear panel.
2. Now, you can access the rear components.
A. Thermo Switch
B. Convection Fan Motor

Removal of Right Side Panel

Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Remove the screws holding the top panel in place.
2. Remove all screws from right side of the oven and then,
remove the right side panel.
3. Now, you can access the right side steam function
components.
A
B
COMPONENT ACCESS (Cont.)
WARNING
Electrical Shock Hazard
A
B
C D
A. Drain Water Return Inlet
B. Water Container Switch
C. Drain Tube
D. Drain Pump
E. Boiler Water Temperature Sensor
JennAir® 60 cm Built-In Steam Oven
E
4-5
n