Toshiba D-R5SU Owner's Manual page 33

You can enjoy multichannel surround-sound such as 5.1 channel by connecting to an amplifier
compatible with Dolby ® Digital and DTS ® sound.
* For connection to your TV, see_pages 25,26 and 32
* For details of output sound, see_page 48 and 49 in "A/V Output".
Caution
. When you are connecting via the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack) an AV decoder that
does not have Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set
m
o
Q.
c
o
o
"Digital Output Mode" to "PCM" from the on-screen displays ( _ 49). Otherwise, high volume sound may
damage your hearing as well as the speakers.
• When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from
the analog stereo jacks. To avoid possible damage to the audio system, you should take proper precautions
when the analog audio out (L/R) jacks of the recorder are connected to an amplification system. To enjoy
DTS Digital Surround ®playback, an external 5.1 channel DTS Digital Surround ®decoder system must be
connected to the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack of the recorder.
J _.
==_ Amplifier ___]
[_ To OPTICAL type digital audio input
D
I To DIGITAL AUDIO _'
OUTPUT "_
BITSTREAM/PCM
O
Optical digital cable (not supplied)
I Manufactured
under license from
DolbyLaboratories.
"Dolby" and'] o
Make the setting on @ page 49, "Digital Output Mode".
the double-D symbol are trademarks of Dolby Laboratories.
J
I "DTS" and "DTS Digital Out" are trademarks of Digital Theater |
Systems, Inc.
J
Notes
* Do not connect the digital audio output bitstream/PCM jack of the recorder to the AC-3 RF input of a receiver
with a Dolby Digital decoder. This input on your AN Receiver is reserved for Laserdisc use only and is
incompatible with the digital audio output bitstream/PCM jack of the recorder.
* Connect the digital audio output bitstream/PCM jack of the recorder to the "OPTICAL" input of a Receiver or
Processor.
* Refer to the owner's manual for the TV to be connected to this recorder for more information concerning
connecting an audio system.
* The output sound of the recorder has a wide dynamic range. Be sure to adjust the audio amplifier's volume to a
moderate listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume
sound.
* Turn off the amplifier before you connect or disconnect the recorder's power cord. If you leave the amplifier
power on, the speakers may be damaged.
:D
0
o
0_
O0
"0
0
33