Sony KLV-S40A10E Service Manual page 13

Timer menu
You can select the options listed below on the Timer
menu, To select options, see "Navigating through
menus" (page 19),
Sets a period of time after which the TV automatically switches itself into the standby mode.
1 Press OK to select "Sleep Timer'.
2 Press ¥/¢ to select the desired time period ("30min'/"60min'/"90min"/
"420min"), then press OK.
The @) indicator on the TV (front) lights up in amber.
Tips
* If you switch off the TV and switch it on again, "Sleep Timer" is reset to "Off."
* "Sleep timer will end soon. Power will be turned off." appears on the screen one minute before
the TV switches to the standby mode.
+ Ifyou press (F9/(2), the remaining time in minutes before the TV switches to the standby mode
is displayed on the screen.
1 Press OK to select "Clock set".
2 Press $/# to select the day, then press =>.
3 Set the month, year, and hour in the same way as in step 2.
4 Press ¥/* to select the minute, then press OK. </=>
The clock starts.
Sets a predefined period of time after which the TV automatically switches on/off.
1 Press OK to select 'Timer'.
2 Press 4/4 to select "Set", then press OK.
3 Press => to select the desired period ("One Day', "Daily", "Mon-Fri" or
"Weekly"), then press OK.
4 Press ¥/# to select "On Time" or "Off Time", then press OK.
Set Up menu
* { Language
i E Country
4} Aulo Tuning
Programme Labels
AV Preset
;$ Manual Programme Preset
{ } Digital Set Up
"Auto StartUp
'Language
Country —
Se
Engtish
Programme Sorting
You can select the options listed below on the Set Up
menu. To select options, see "Navigating through
menus" (page 19).
Starts the "first time operation menu" to select the language and country/region, and tune in
ail available digital and analogue channels. Usually, you do not need to do this operation
because the language and country/region wil] have been selected and channels already tuned
when the TV was first installed (page 13). However, this option allows you to repeat the
process (e.g., to retune the TV after moving house).
1 Press OK to select "Auto Start Up".
2 Press OK to select "Yes."
The Language menu appears on the screen.
3 Follow steps of "6: Selecting the language and country/region" (page 12)
and "7; Auto-tuning the TV" (page 13).
Selects the language in which the menus are displayed.
1 Press OK to select "Language".
2 Press t/$/4/=> to select the language, then press OK.
AH menus wilt! appear in the selected language.
Selects the country/region where you operate the TV.
1 Press OK to select "Country".
2 Press #/# to select the country/region in which you will operate the TV,
then press OK.
Z0003-WH /Z00V3-WY
XVM