Advertisement
(Models VHR-2100EX, VHR-2300 EX, G)
(Models VHR-2100 EX, VHR-2300 EX, G)
and than remove the soldered lead wire.
(2) Remove the screws (b) securing the stator, and then
(Note)
remove the stator.
Be careful to the solder the lead wire at correct position.
(3) Install the new drum motor by using the reverse order
(3) Check the tape path.
of the removal procedure.
VIDEO HEAD LEAD WIRE POSITION (TOP VIEW)
RED TUBE (don't remove)
Yellow lead wire
Red lead wire
Brown lead wire
Yellow lead wire
BROWN TUBE
Fig. 2-4-6
(Note)
Use the torque gauge screwdriver (VHJ-0014) for installa-
tion of the stator and rotor.
The tightening torque of the stator is 3kg-cm, and for the
rotor is 2kg-cm. (When installing, first tighten to a tem-
porary tighteness and then tighten to the specified torque.)
=
Advertisement
