Wyrestorm FOCUS 200 PRO Quick Start Manual

4K UHD USB Webcam
FOCUS 200 PRO

Setting up the Webcam

FOR PLACEMENT ON A MONITOR

1. Place your webcam on a computer, laptop or
monitor at a position or angle you desire.

FOR PLACEMENT ON A TRIPOD*

1. Locate the M12 tripod thread on the bottom of
the webcam.
*Tripod not included

CONNECTING THE WEBCAM

Plug the webcam into an available USB port on your computer
Please Note: The FOCUS Webcam must be installed at a height no greater than 2m/6.5ft

CAMERA SOFTWARE

All Focus models share an app that allows for firmware upgrades and control functions of certain models.
To download the most up to date version of this software, visit
Copyright © 2023 WyreStorm Technologies |
Focus 200 PRO Quickstart Guide | 230726
2. Adjust the webcam to make sure the foot on
the universal mounting clip is flush with the
back of your device.
2. Secure the webcam on your tripod by twisting it
into the M12 thread.
SUCCESSFUL CONNECTION
The LED activity light will light when the webcam is in use by an application.
wyrestorm.com
wyrestorm.com INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)
1 of 3
Quickstart Guide
3. Manually adjust the webcam up/down to the
best position to frame yourself.
Place your webcam with the tripod anywhere you
desire to the best position to frame yourself.
support@wyrestorm.com