Wyrestorm FOCUS 100 Quick Start Manual

4K UHD and 1080p HD Ultra-Wide Angle USB
Webcam with Integrated Microphone
FOCUS 100 | FOCUS 200 | FOCUS 210

Setting up the Webcam

FOR PLACEMENT ON A MONITOR

1. Place your webcam on a computer, laptop or
monitor at a position or angle you desire.

FOR PLACEMENT ON A TRIPOD*

1. Locate the M12 tripod thread on the bottom of
the webcam.
*Tripod not included

CONNECTING THE WEBCAM

Plug the webcam into an available USB port on your computer
*For the best video quality on FOCUS 200/210, it is recommended to use a USB 3.0 connection
Please Note: The FOCUS Webcam must be installed at a height no greater than 2m/6.5ft

CAMERA SOFTWARE (ONLY APPLICABLE FOR FOCUS 200/210 MODELS)

The Focus 200/210 has its own control software that can be used to control ePTZ and other functions.
To download the most up to date version of this software, visit
Copyright © 2021 WyreStorm Technologies |
Focus 100 | 200 | 210 Quickstart Guide | 210609
2. Adjust the webcam to make sure the foot on
the universal mounting clip is flush with the
back of your device.
2. Secure the webcam on your tripod by twisting it
into the M12 thread.
SUCCESSFUL CONNECTION
The LED activity light will light when the webcam is in use by an application.
wyrestorm.com
wyrestorm.com INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)
1 of 3
Quickstart Guide
3. Manually adjust the webcam up/down to the
best position to frame yourself.
Place your webcam with the tripod anywhere you
desire to the best position to frame yourself.
support@wyrestorm.com