Advertisement
Special Notice:
Only under normal condition can the quality of LCD products be
assured during operation. Normal condition as following:
Temperature: 20±15;
Moisture: 65±20;
Display image: continuously changing image. (Not freezing image).
For the LCD products, the phenomenon of image stagnation may
appear when display the freezing image for a certain long time. All
the display products including LCD may have this kind of image
stagnation, and this is not a kind of defect.
In order to avoid the phenomenon of image stagnation, we
suggest that the screen protection program be set when
your PC or system is spare.
Connection
1.
Turn Off computer and Unplug Adapter.
2.
To connect signal cable with 15pin into VGA or HDMI out hole on the back of
monitor, and to be sure to tighten switches on both ends of signal cable.
3.
To plug PC and monitor adapter to the nearest socket.
4.
Turn on PC and monitor, image possibility shows successful installation. If not,
please double check all the connections.
Notes:
1. To connect signal cable and plug adapter to be assure monitor safety on
process of installation.
2. To avoid monitor damaged, please handle the centre part of front cover
while it installation.
Monitor Input Connections
1
2
3
Stand Assembly Instruction
Front Panel Controls
Press it to open the OSD MENU, to select MENU options
1
when the OSD MENU is displayed.
Hot key to adjust contrast.
2
1
Down selection button.
Hot key to adjust brightness.
Up selection button.
Hot key to automatically optimize positions, phase and clock when OSD is not shown.
2
To exit OSD MENU when OSD is shown.
Power On or OFF; LED-On Normal; LED flicker: Power Saving; LED-Off: Power Off.
1. DC
Power Input
2. HDMI
Signal Input
3. VGA
Signal Input
Advertisement
