Table of Contents
Advertisement
SE-CH610
Mm Stacking the Components
einstall the various components as shown in the illustration.
To produce a better stereo sound, install both speakers away from
the system.
@The configuration of the amplifier differs according to the area.
Horizontal stacking U4
Vertical stacking E]
SRA
AAS SO aS
ST-CH610
Tuner/sound processor
SL-CH610
ST-CH610
CD changer
Tuner/sound processor
SE-CH610
Amplifier
SB-CH610
RS-CH510
SE-CH610
SB-CH610
:
ey
ae
SL-CH610 _
Speaker
Cassette deck
Amplifier
Speaker
4
CD changer
Con
Connecting
Disconnecting
ST-CH610
SL-CH610
RS-CH510
System connections
Connect the AC power supply cord after you have connected
all
Be
sure
to
connect
the
blue-colored
connector
to
B1
other cables.
(tuner/sound processor).
I
Connect the
flat cables.
After connection, hold and press the cable as flat to the back of
the unit as possible. (To minimize noise pickup while listening
an AM broadcast)
Hold the connector with the recessed part up and press in at
the center until you hear a click.
1. Connect
the shorter
flat cable to the terminal
of the
tuner/sound processor and amplifier.
Do not try connecting
or disconnecting
the flat
2. Connect
the longer flat cable
to the terminal
of the
cables while the power is switched to ON.
tuner/sound processor, compact disc changer, and cassette
deck.
(To be continued)
ae: ae
Advertisement
Table of Contents
