Akai EA-G90 Operator's Manual page 2

Operator's Manual
WARNING
Voltage Selection
Power requirements for electrical equipment differ
from area to area.
Please ensure that your machine meets the power
requirements in your area.
lf in doubt, consult a qualified electrician.
120V, 60 Hz for USA and Canada
220V, 50 Hz for Europe except UK
240V, 50 Hz for UK and Australia
110V/120V/220—240V, 50/60 Hz internally switch-
able for other countries.
DO NOT ATTEMPT THIS CONVERSION
YOURSELF.
Voltage conversion (Models for Canada, USA, Eu-
rope, UK and Australia are not equipped with this
facility). Each machine is preset at the factory ac-
cording to destination, but some machines can be set
to 110V, 120V or 220—240V as required. If your ma-
chine's voltage can be converted, refer the following
voltage conversion to a qualified Service Repair Shop
or professional service personnel.
1. Disconnect power cord.
2. Loosen holding screws and remove top panel.
3. The voltage convertor is near the Power Switch
P.C. Board.
4. Disconnect the existing wire and connect the re-
quired wire to the proper terminal.
Terminal
P, —110V
P, — 120V
P3 — 220—240V
Wire (Blue)
POWER
Switch
P.C. Board
Voltage Conversion
Terminal Block