Input / Call Memory; How To Input Folding Size Into Memory; How To Call Memorized Folding Size - Horizon Fitness PF-P320 Manual

2. Operation Procedure

2-3 Input / Call Memory

2-3-1 How to input folding size into memory

Folding size can be input the Memory up to
two different folding sizes.
1.
Depress mode select button 3 times.
"Memory 1 Press MEMORY" is indi-
cated on LCD. Depress mode select
button 4 times. "Memory 2 Press
MEMORY" is indicated on LCD.
2.
When "Memory 1 Press MEMORY" or
"Memory 2 Press MEMORY" is indi-
cated on the LCD, it is possible to input
present position of stopper with memory
button.
NOTE
- When memory button is depressed, previ-
ous memory is erased and the new memory is
stored.
- After inputting folding size, "0 / 0" is
indicated automatically on LCD.
-Memory will hold after power is OFF.

2-3-2 How to call memorized folding size

Depress memory button, and memorized
folding size is shown in LCD.
- See Chapter "2-1 Operation Procedure",
and perform the procedure from step 1 to
6 (page 8 ~ 9). Then, call the settings
from the memory.
- Depress memory button once to call
Memory 1.
- Depress memory button twice, to call
Memory 2.
- After calling memory, follow "2-1 Op-
eration Procedure": from step 9
(page 10 ).
NOTE
When Stopper size is set with number entry
key, lamp at delivery section does not turn
on. When smaller sheet is used, set to right
side, and when lager sheet is used, set to left
side.
16