Information Codes - Samsung NX60 83 S Series User Manual

Problem
Food does not The wrong cooking mode
bake or roast was selected.
properly in the
The oven racks have not
oven.
been positioned properly
for the foods being
cooked.
Incorrect cookware or
cookware of improper
size is being used.
The oven temperature
needs to be adjusted and
recalibrated.
There is aluminum foil
on racks and/or oven
bottom.
The clock or timers are
not set correctly.
Food does not The oven controls are not
broil properly in set properly.
the oven.
The oven door was not
closed during broiling.
The rack has not been
properly positioned.
DG68-01327A-02_IB(FULL)_NX60A8315SS_AX_MES+EN.indb 47 DG68-01327A-02_IB(FULL)_NX60A8315SS_AX_MES+EN.indb 47
Cause Action
See page 22.
See page 21.
See page 18.
See page 30.
Remove foil.
See pages 15 and 25.
See page 24.
See page 22.
See the broiling guide on
page 24.

Information codes

Code symbol Meaning
Oven sensor malfunction.
The oven is overheating.
Check the Control PBA NTC
Sensor.
Check the PBA NTC Sensor.
Check the PBA NTC Sensor.
Control pad malfunction.
Door lock malfunction.
PCB signal malfunction.
Touch IC and PCB signal malfunction.
Oven vent blocked.
Gas leakage in the gas
connection section.
** If these solutions do not solve the problem,
contact a local Samsung service center.
Solution
1. Press Apagar/Borrar
(OFF/CLEAR), and then restart
the oven.
2. If the problem persists,
disconnect all power to
the oven range for at
least 30 seconds and then
reconnect the power.
1. If oven vent or cover air is
blocked by aluminum foil or
others, remove that and restart
oven.
2. To reset error, disconnect power
or tap Apagar/Borrar
(OFF/CLEAR) after opening the
oven door at least 60 seconds.
1. Disconnect power. Open the
back cover. Check there are
signs of combustion in the gas
connection section.
2. If there are signs of combustion,
replace GPR and TCO and check
the gas leakage.
3. If there are no signs of
combustion, check wire-TCO,
Wire main - sub connection
status and PBA S/W version.
English 47
2023-10-30 오후 2:14:58 2023-10-30 오후 2:14:58