Log In To The Modem (Router) Configuration Page; Set Up Your Modem (Router) For The Connection; Internet Connection Type; Username - TP-Link AX3000 Setup

Hide thumbs Also See for AX3000:

Table of Contents

Step 1. Log in to the modem (router) configuration page.

1. Connect your device to the modem (router) with LAN cable.

2. Open a web browser on your device.

3. Enter the

http://tplinkwifi.net

4. You will be asked to set up a new password for the first time logging-in. If you have already set

up previously and don't remember the password then factory reset the modem (router) first by

press the 'Reset' button on the back of the modem (router).

Step 2. Set up your modem (router) for the connection

1. Best to avoid the 'Quick set up' and go to 'Advanced' option instead. Click 'Network' then 'Internet'

from the menu.

2. Please configure your modem (router) settings as below:

(access from 'Advanced Settings' option)

** Please also look for options and set

3. Click on 'Save' or 'Apply' button and you will be ready for the broadband connection.

or the number 192.168.0.1 on the address bar.

PPPoE

nga@megatel.co.nz

megatel

1492

Enable VLAN: Ticked

and

Table of Contents

Need help?

Do you have a question about the AX3000 and is the answer not in the manual?