Table of Contents
Advertisement
Quick Links
INSTALLATION AND USER GUIDE
HUNTLEY Complete 2-Piece Toilet
TT-7250HC-W
Read all instructions carefully before proceeding.
• To ensure that timely and e ective service is available for you, please keep this manual for future reference.
© 2023 FGI Industries, Ltd. | CRAFT + MAIN™ and logo design are trademarks of FGI Industries, Ltd.
JUNE 15, 2023
USA: www.craftandmain.com | CANADA: www.craftandmain.ca
1
Advertisement
Table of Contents
Related Manuals for Craft+Main HUNTLEY TT-7250HC-W
Summary of Contents for Craft+Main HUNTLEY TT-7250HC-W
- Page 1 INSTALLATION AND USER GUIDE HUNTLEY Complete 2-Piece Toilet TT-7250HC-W Read all instructions carefully before proceeding. • To ensure that timely and e ective service is available for you, please keep this manual for future reference. © 2023 FGI Industries, Ltd. | CRAFT + MAIN™ and logo design are trademarks of FGI Industries, Ltd. JUNE 15, 2023 USA: www.craftandmain.com | CANADA: www.craftandmain.ca...
- Page 2 INSTALLATION AND USER GUIDE HUNTLEY Complete 2-Piece Toilet TT-7250HC-W HARDWARE & PARTS LIST Complete Lever Complete Flush Valve with Flapper (Installed) Complete Fill Valve with Float (Installed) Rubber Bolt Washers Metal Washers Metal Tank Bolts Metal Nuts Oval Washers Wing Nuts Large Rubber Sealing Gasket Plastic Bolt Caps &...
- Page 3 INSTALLATION AND USER GUIDE HUNTLEY Complete 2-Piece Toilet TT-7250HC-W STEP 1 REMOVING OLD TOILET Turn o the water supply. Flush the toilet to empty the tank. Remove any water left in the tank or bowl. Disconnect the supply line from the tank. Remove decorative caps. Unscrew nuts that attach the toilet to the floor. Remove toilet.
- Page 4 INSTALLATION AND USER GUIDE HUNTLEY Complete 2-Piece Toilet TT-7250HC-W STEP 4 INSTALLATION PROCEDURE Install plastic cap washers (K), followed by metal washers (P) and nuts (Q) onto the floor-bolts (N). Tighten the bolts alternately until toilet is firmly seated on the floor. Install the plastic bolt caps (K). CAUTION: DO NOT OVERTIGHTEN NUTS, SEVERE DAMAGE MAY OCCUR.
- Page 5 INSTALLATION AND USER GUIDE HUNTLEY Complete 2-Piece Toilet TT-7250HC-W STEP 6 INSTALLING TANK LEVER Turn clockwise to remove plastic nut from the lever arm. Insert lever arm through the hole on the side of tank. The lever should be pointing to the back side of the toilet. Screw the plastic nut counter clockwise to tighten it.
- Page 6 INSTALLATION AND USER GUIDE HUNTLEY Complete 2-Piece Toilet TT-7250HC-W STEP 8 CONNECTING WATER SUPPLY Connect water supply line (new or existing) between shuto valve and tank inlet water fitting. Tighten coupling nuts securely. NOTE: DO NOT OVERTIGHTEN. Turn on supply valve and allow tank to fill until float rises to shuto position. Check for leakage at fittings, tighten or correct as needed.
- Page 7 WARRANTY REGISTRATION: CUSTOMER SERVICE: U.S. CUSTOMERS: 1-888-620-3667 To receive warranty coverage for your purchase, you must complete the warranty registration form found on our website Monday - Friday, 7:00 a.m. - 5:00 p.m., CT within 30 days of purchase, or provide valid proof of purchase www.craftandmain.com | customerservice.us@fgi-industries.com detailing the date and location of your purchase.
Need help?
Do you have a question about the HUNTLEY TT-7250HC-W and is the answer not in the manual?
Questions and answers
should tank sit firmly on bowl. large gasket seems to be too thick. Also, instructions for seat bolts are very poor, needs an illustration showing all washer and nut placement.
Yes, the Craft+Main HUNTLEY TT-7250HC-W tank needs to sit firmly on the bowl. The instructions state to tighten the wing nuts enough so that the tank sits flat on the toilet bowl. There is no mention that the large rubber sealing gasket is too thick.
This answer is automatically generated