Table of Contents
Advertisement
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[6] Speaker L
[7] Speaker R
[1] Rear Cabinet
[2] Jack Holder
[3] Main CBA
[4] LCD Main CBA &
Liquid Crystal Panel Unit
[5] Function CBA
[8] Front Cabinet
2. Disassembly Method
ID/
LOC.
PART
No.
[1] Rear Cabinet
[2] Jack Holder
[3] Main CBA
LCD Main
CBA & Liquid
[4]
Crystal Panel
Unit
[5] Function CBA
[6] Speaker L
[7] Speaker R
[8] Front Cabinet D2 ---------------
↓
↓
(1)
(2)
(1): Order of steps in Procedure. When reassembling,
follow the steps in reverse order.These numbers
are also used as the Identification (location) No. of
parts in Figures.
(2): Parts to be removed or installed.
(3): Fig. No. showing Procedure of Part Location.
(4): Identification of part to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
S=Screw, P=Spring, L=Locking Tab, CN=Connec-
tor, *=Unhook, Unlock, Release, Unplug, or Desol-
der
2(S-2) = two screws (S-2)
(5): Refer to the following Reference Notes in the
Table.
4-1
REMOVAL
REMOVE/
*UNHOOK/UNLOCK/
Fig.
No.
RELEASE/UNPLUG/
DESOLDER
D1
6(S-1), (S-2),
D3
*CN801, *CN802
D2 (S-3), (S-4), (S-5)
8(S-6), 3(S-7),
*CN101A, *CN102A,
D2
D3
*CN103A, *CN104A,
*CN401, *CN402
D2
7(S-8)
D3
D2
4(S-9)
D3
D2
2(S-10)
D3
D2
2(S-11)
D3
↓
↓
(3)
(4)
L0207DC
Note
---
---
---
---
---
---
---
---
↓
(5)
Advertisement
Table of Contents
