Table of Contents
Advertisement
Open the Home Connect app and
1.
scan the following QR code.
Follow the instructions in the Home
2.
Connect app.
16.2 Remote Launch
You can start the device with your
mobile device using the Home
Connect app.
Tip:If you go to the basic settings →
Page 39 If you set this function to "rc2",
the function is permanently activated
and you can start your device at any
time with a mobile device.
Enable remote start
If you have set "rc1" in the basic
settings for this function, activate the
function on your device.
requirements
¡The device is connected to your WiFi
Home network connected. ¡The device is
connected to the Home Con-
nect app connected.
¡In the basic settings
→ Page 39 This function is set to
"rc1".
¡A program is selected.
press.
▶
When you open the device door, the
function is automatically
deactivated.
abutton
shines.
Tip:To deactivate the function, press.
16.3 Privacy
Please note the information on data
protection.
When your device is connected to a
home network connected to the
Internet for the first time, your device
transmits the following categories of
data to the
Home Connect server
(First registration):
¡Unique device identifier (best
from device keys and the MAC
address of the installed Wi-Fi
communication module). ¡Wi-Fi
communication security certificate
communication module (for
information technology security of
the connection).
¡The current software version and
Hardware version of your home
appliance. ¡Status of any previous
previous reset to factory settings.
This initial registration prepares you
to use the Home Connect
functionalities and is only required at
the time you want to use Home
Connect functionalities for the first
time.
A notice:Please note that the Home
Connect functionalities can only be used
in conjunction with the Home Connect
app. Information on data protection can
be found in the
Home Connect app can be accessed.
Home Connectde
41
Advertisement
Table of Contents
