Robic 1000W Operating Instructions Manual

Robic 1000W OPERATING INSTRUCTIONS
THANK YOU for buying the Robic 1000W Dual Stopwatch and Countdown
Timer. Your purchase brings you a reliable, World-Class Timer with separate
modes for Lap and Split Timing and a Full Function Countdown Timer.
Your Dual Stopwatch and Countdown Timer was developed to provide a
Multi-mode Chronograph with Two Finish Time Memory Recall, plus a Countdown
Timer which shows time remaining and signals completion of the countdown. In
order to ensure that you receive the maximum enjoyment from your Dual
Stopwatch and Countdown Timer, BEFORE USING, PLEASE TAKE A MOMENT
TO REVIEW THIS OPERATION GUIDE TO FULLY UNDERSTAND HOW YOUR
TIMER WORKS.
FEATURES
• Event, Lap or Split Timing
• 1/100 second Precision to 10 hours
 Audible Beep Tone when button
• Two Finish Time Memory Recall
• An unlimited number of time readings can be taken
• Countdown Timer shows Time Remaining; Counts up at completion
• Audible Alarm at Completion of Countdown
• Countdown Timer range from 1 second to 10 hours
• Splash Resistant, Extra Large Display
• Long life LR44 battery included
• One year factory warranty
IMPORTANT NOTE:
Please select the timing function you wish to use by pressing button B. Then,
proceed as described in these instructions.
Pressing button B will continue to change modes even while the timer is running
(active).
Do not change modes while timing or the timer may not record your desired
results.
For example: Should you wish to record lap time, do not enter SPLIT mode to
take time readings.
Display Mode
Function keys
A: LAP/SPLIT/RESET
B: MODE
C: START/STOP
A----
----C
-----B
Note: either front push button can be used as "B"