Table of Contents
Advertisement
Quick Links
Page 1 of 8
Rev 02 05/04/05
SC-606
Thank you for buying the Robic SC-606. Your purchase brings you a world class timer with a vast array of
advanced timekeeping functions.
Please take a few moments to review this operating guide, so that you may become familiar with the SC-
606's many capabilities and how you can best access them for your maximum benefit.
PART I
PUSHBUTTON and INDICATOR LOCATION
The following illustration details the location of pushbuttons and indicators for setting and operating the
SC-606.
Pushbutton "B"
LAP •SPLIT/RESET
Pushbutton "D"
AVG/MAXIMUM
Alarm Time Display
Pushbutton "F"
Memory Recall/SET
The indicators in this illustration will appear only when a particular mode or function is activated by
pressing a pushbutton.
Once you are familiar with the SC-606's operation, you will be ready to enjoy its many functions. The
starting point for any operation is the NORMAL TIME mode. You may sequence through the modes by
pressing "E".
NORMAL TIME
Time of Day in Hours, Minutes and Seconds
Calendar with Day, Month and Date
AM/PM or 24 Hour Time Options
Daily Alarm and Hourly Chime
CHRONOGRAPH (Stopwatch)
Three (3) Timing Options
(1) Lap Time Chronograph
SC-606 Instructions
Pushbutton "A"
START/STOP
Indicators:
UP, DOWN, AVG, MAX, SET
Indicators:
CHRONO, LAP/SPL, RUN, STOP, RCL, ♠, (((•)))
Pushbutton "C"
ADVANCE/RELEASE, Alarm/Chime On/Off
Pushbutton "E"
MODE/NEXT
Advertisement
Table of Contents
Related Manuals for Robic SC-606
Summary of Contents for Robic SC-606
- Page 1 SC-606 Instructions SC-606 Thank you for buying the Robic SC-606. Your purchase brings you a world class timer with a vast array of advanced timekeeping functions. Please take a few moments to review this operating guide, so that you may become familiar with the SC- 606’s many capabilities and how you can best access them for your maximum benefit.
- Page 2 Page 2 of 8 Rev 02 05/04/05 (2) Split (accumulated) Time Chronograph, or (3) Dual Lap/Split Time Chronograph Each option offers these functions: 1/100 Second Resolution to 24 Hours Recall of the previous 30 Time Readings Automatic Lap/Split Counter . . . up to 999 Readings Memory Recall Can be Presented in Either Ascending (1,2,3.
- Page 3 The Hourly Chime can be armed to sound one (1) beep at the top of each hour. The Chime indicator (♠ ) will appear when the chime is armed. While your SC-606 is in NORMAL TIME mode, press “C” to arm, or disarm your alarm and chime. The sequence is:...
- Page 4 Press “B” to take a Lap Time. The previous Lap Time will appear in the upper row of the display and the current Lap Time will build up from zero in the bottom row. The SC-606 will take up to 999 lap times.
- Page 5 Upon releasing the frozen time display, the LAP COUNTER will increase by one (1) to indicate the second segment is now displayed. The SC-606 will take up to 999 Dual Split readings. You may recall up to the previous 30 at any time by pressing “F”.
- Page 6 “F” to exit the setting procedure. The preset time will appear in both the upper and lower rows of the display as shown below. Please note the SC-606 will automatically exit the setting procedure if no pushbuttons are pressed within two (2) minutes of entering the “SET” mode.
- Page 7 Page 7 of 8 Rev 02 05/04/05 “Time Out”. You may stop and restart the CDT by pressing “A”. While stopped, the “STOP” indicator will appear. You may restart the timer by pressing “A” or reset to the original preset time by pressing “B”. Upon completion of the Countdown time, a beep tone will sound to indicate the end of the time.
- Page 8 NEVER include a personal item, such as a watchband, with the repair request. Robic offers a complete line of the world's finest timers and stopwatches for all your needs. Please call at (203) 264-2702 for a free catalog.
Need help?
Do you have a question about the SC-606 and is the answer not in the manual?
Questions and answers