Viking DLE-200B Technical Practice page 2

I n s t a l l a t i o
I n s t a l l a t i o
The is designed to initiate a call when either port goes off-hook. The port that comes off hook first will receive 2 seconds of
dial tone. The other port will then begin ringing until answered (factory default programming). The "
device port is off-hook and will turn off during the duration of the CPC break and/or when both device ports are on-hook. Note: Dial tone
and/or ringdown can be disabled, see Programming sections A-C. The following sections
IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC outlet and the telephone line.
It is recommended that a surge protector be installed to protect against such surges. Contact Panamax at (800) 472-5555 or Electronic Specialists
Inc. at (800) 225-4876.
Easily demonstrate the features of fax machines,
answering systems, feature phones, modems, key sys-
tems, or nearly any analog telecom device. The
eliminates the need to locate phone lines and
disrupt the phone service during demonstration.
Demonstrations can be complete and comprehensive
but non-disruptive.
Note: In fax/modem applications it may be necessary
to reduce the volume level by setting DIP switch 3 to
the ON position (see Programming, section A).This
may increase data speed and help eliminate data
transmission errors. For modem speeds faster than
28.8 kps, use Viking model DLE-300.
When used for ringdown applications, the
the need for station circuits, phone systems or C.O. lines. This
application is ideal for courtesy phones, infra and inter-office
communications, warehouse and elevator phones.
n a n d A p p
n a n d A p p
Need More Information on the DLE-300?
l i c a t i o n s
l i c a t i o n s
Fax, Modem, Etc.
eliminates
" LED will light when either
show installation of various applications.
VIKING
RINGDOWN
©
1 2
DLE-200B
BUSY
1 2 3 4
Up to 2.6 Miles
VIKING
RINGDOWN
©
1
DLE-200B 2
BUSY
1 2 3 4
Up to 2.6 Miles
Personal Computer