Advertisement
For more information about the ARM SYSTEM and to learn how to configure a
complete safety system, refer to the ARM SYSTEM Configuration Manual (PART02323).
For more information about the ARM CONTROLLER and to learn how to correctly set
up and use the ARM SYSTEM, refer to the ARM CONTROLLER User and Installation
Manual (PART01882).
INSTALLATION
WARNING
NOTICE
Install the COMBINER BOX in the ARM safety circuit and connect the COMBINER BOX
to a power source. Check the following installation variants for connection details.
A
Use the COMBINER BOX to split the ARM signal into a master line and a slave
line. The slave signal is also boosted in this setup.
ARM CONTROLLER
B
Use a dedicated COMBINER BOX to boost the ARM signal.
POWER
Make sure that you are familiar with and comply with the instruc-
tions from the user and installation manuals of each relevant
ARM SYSTEM component and each connected SFX machine.
Insert a TERMINATOR in the last ARM output of each master and
each slave line to close the safety circuit. The ARM SYSTEM will not
work when a line remains open.
ARM
master
terminator
POWER
insert
terminator
ARM
master
COMBINER BOX
MAGICFX
SFX SAFETY COMBINER BOX — User and Installation Manual
®
ARM
master
COMBINER BOX
ARM
slave
ARM
slave
Advertisement
