Technical Data - GARANT 081441 200 User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 7
GARANT Cordless work lamp
WARNING
Risk of blinding and injury to the retina
de
»
Never look directly into the light beam.
»
Do not direct light beam at animals' or people's eyes.
»
In the event of commercial use, the user must be instructed according to the accident prevention regulations.
6.1.
SWITCHING THE MAIN AND SPOTLIGHT ON/OFF
1. Press the on/off button.
»
The spotlight comes on.
2. Press the on/off button again.
»
The spotlight goes out.
en
»
The main beam comes on at the last intensity setting used.
3. Press the On/Off button to switch off the main beam.
6.2.
DIMMING THE MAIN BEAM
1. Switch on the main beam.
2. Keep the on/off button pressed until the desired intensity is reached.
»
The main beam flashes when the highest or lowest intensity has been reached.
»
The light intensity is saved 5 seconds after activation.
6.3.
CHECKING BATTERY CHARGE
cs
ü The lamp must be switched off.
1. Keep the on/off button pressed until the charge indicator lights up.
»
The number of LEDs lit corresponds to the battery charge.
6.4.
ATTACHING THE LAMP
The magnetic base will stick to all smooth flat magnetic surfaces. Folding and pivoting suspension hook for hanging up the
lamp.
7.
Storage
es
Before placing the lamp in storage, fully charge the battery. Recharge the battery every three months. Store at temperatures
between -10°C and +40°C. Do not store in the vicinity of acidic, aggressive, chemical substances, solvents, humidity and dirt.
8.
Cleaning
Disconnect from the power supply before starting cleaning. Clean with a slightly damp cloth. Do not use chemical, alcohol-
based, abrasive or solvent-based cleaners.
9.

Technical data

Lamp
fr
Illumination
Working life
LED
Colour temperature
CRI
it
Indices of protection
Ambient temperature range
Battery
Battery
Charging duration
Charger's rated AC voltage
pl
Charger's DC charging voltage/current
8
Main beam
20 – 200 lm
2 – 20 h
COB LED
6000 K
≥ 80
IP 65, IK 07
-10°C to +40°C
Li polymer 3.7 V, 1200 mAh
2 – 3 h
100 – 240 V AC, 50/60 Hz
5 V/1.5 A
Spotlight
100 lm
3 h
High power LED
6000 K
≥ 70
IP 65, IK 07
-10°C to +40°C

Advertisement

Table of Contents
loading

Table of Contents