Sound (Digital Audio Output Setting); Opacity (Changing Transparency Of On-Screen-Display); I-Plate (Changing Display Time Of The Information-Plate) - ViewSonic NextVision HD-12 User Manual

Sound (Digital Audio Output Setting)

The digital channel's sounds can be output from the
rear-panel S/PDIF connectors of your receiver. The
digital sound outputs are either optical through or
coaxial connectors. After connecting an optical or
a coaxial digital-audio component, you must specify
the transmission format (Dolby Digital or PCM).
● Press Enter on Sound to show the audio format
option, you can press ◄ ► buttons to highlight
the desired audio format, and then press Enter to
confirm the setting.
● Press EXIT button to back to the main menu or
press MENU button to leave.
Opacity proper (Changing Transparency of On-Screen-Display)
● Press ▲▼ buttons to highlight the Opacity and
press Enter.
● Use the ◄ ►buttons to change the percentage of
the On-Screen-Display's transparency.
● Press EXIT button to back to the main menu or
press MENU button to leave.

I-Plate (Changing Display time of the information-Plate)

● Select the I-Plate, you can press ◄ ► and ▲▼
buttons to change the Information-Plate display
time to 2, 4, 6 seconds or off mode.
● Press EXIT button to back to the main menu or
press MENU button to leave.
26