Advertisement
Electronic Flash
-
Set the synchronizer selector
pointer on X. With electronic flash equipment
having
no lag in the trip circuit, set the shutter at
any speed from 1 second to 1;500 second.
Note:
Do not use units flashed by means of heavy-
duty relays or solenoids. Such
units may
destroy
the shutter contacts.
THE SELF-TIMER-If
you wish to
include
yourself in
a
picture,
first operate the rapid wind lever; then
set the selector pointer to V. Start the self-timer
mechanism
by pressing the exposure release"x".
The
shutter will go off after about 10 seconds - time to
take your place in the picture.
If
you use the self-timer for flash shots, the
camera works with the X-synchronization. As the
self-timer runs down, the synchronizing lever
automatically moves to X. Be sure to use the cor-
rect shutter speed setting for X-synchronization.
No.5,
No.
25 or No. 8
lamps
can be used at X
selector setting for speeds from
1
to 1/30 second.
27
*After moving
the
selector
lever to
"V,"
it
must be
returned
by making
an exposure.
Do not
force
the lever.
Advertisement
