Advertisement
MAINTANENCE
TZ0, like most modular synth equipment
will not need any particular
maintenance. However, some people
may want to adjust the trimmer pots on
the module, such as perfecting the V/oct
response for your particular case, MIDI
converter, etc.. The following trimmer
pots are located on the rear PCB of TZ0
and are labeled on the top side of the
board with their function:
-
V/oct trimmer *
-
High Frequency compensation trim *
-
Sine roundness trim
* If you wish to fine tune the V/oct and
HF compensation trimmer, remember to
set the "TZ Offset" pot to center (high
noon) while doing so.
CONCLUSIONS
As with any piece of modular synth
equipment, it is best to just play with it
by itself and with other modules. Find
what you like and most importunely,
have fun making music!!
© 2023 Weston Precision Audio
R21
6
4.7k
-12V Node
Advertisement
