Table of Contents
Advertisement
1.
Switch over to the screen camera (press F1).
2.
Go down in magnification.
3.
Click holder reset in the stage operation
window.
4.
Remove the holder by following the guidelines
(more info on page 6).
5.
Place holder in it's stand and carefully open top
lid and remove your samples. Place new grids in
the holder and close the lid (with tweezers or by
pulling the silicon cylinder).
6.
Insert holder by following the guidelines (more
info on page 6).
7.
The beam should come on automatically after
you have inserted the sample holder. If not, turn
on the beam.
The process of exchanging samples
5
1
2
6
3
7
Advertisement
Table of Contents
