Hitachi RAS-E70YHAB Instruction Manual page 6

NAMES AND FUNCTIONS OF REMOTE CONTROLLER
■ This controls the operation function and timer setting of the room air conditioner. The range of control is
about 7 meters. If indoor lighting is controlled electronically, the range of control may be shorter.
MODE selector Button
Use this button to select the
operating mode. Every time you
press this button, the mode will
(AUTO) ➞
change from
(HEAT) ➞
(DEHUMIDIFY)
➞ (COOL) and ➞ (FAN)
cyclically. ( Page 7)
ECO Button
Use this button to set the
ECO mode.( Page 15)
TIMER OFF Button
Select the turn OFF timer.
( Page 11)
TIMER ON Button
Select the turn ON timer.
( Page 11)
SLEEP Button
Use this button to set sleep timer.
( Page 17 )
POWERFUL Button
Press this button to start POWERFUL
operation. ( Page 12)
LEAVE HOME Button
( Page 13)
Precautions for Use
Do not put the remote controller under direct sunlight and high temperature.
●
Do not drop it on the fl oor, and protect it from water.
●
If you press the FUNCTION button during operation, the air conditioner may stop for about 3 minutes
●
for protection before you can start it again.
Signal Transmission
FROST WASH Button
( Page 14)
– 6 –
Transmission Sign
The transmission sign blinks
when a signal has been sent.
ON/OFF Button
Press this button to start
operation.
Press it again to stop operation.
( Page 7)
TEMPERATURE Button
Room temperature setting.
Value will change quicker when
keep pressing.
( Page 7)
FAN SPEED Button
Select the fan speed for cooling
and heating mode.
( Page 11)
UP/DOWN Button
Controls the angle of the
horizontal air defl ector.
( Page 18)
RIGHT/LEFT button
Control the angle of the vertical
air defl ector
( Page 18)
SILENT Button
Use this button to set SILENT
mode. ( Page 16)