Page 3
ATTENTION ! The DOSATRON is not preset, see chapter ADJUSTING THE INJECTION RATE. UNIT SIZE PARCEL CONTENTS : 1 non-electric proportional Dosatron / 1 ABS wall case Diameter: 7" 15/16 [20,2 cm] / 1 shut-off valve / 1 anti-pollution disconnection, BA type (NORM EN 1717) Total height: 19"...
Precise, simple and reliable Summary Installed directly in the water supply line, the Dosatron operates by using the flow of water as the power source. The water activates the Dosatron, which takes up the required percentage of concentrate directly from the INSTALLATION PAGE container and injects it into the water.
SHIPPING CONTENTS DISCONNEXION Parcel contents All our HU1 hygiene units are delivered Disconnector type BA: disconnector with a BA-disconnector. with reduced pressure zones which The user must respect the corres- can be monitored (compulsory an- ponding legislation in force. nual control).
■ operating valve : 2 positions of the lever with 1 function each : Dosing (water + product) / Stop (stopping the system) ■ non-return valve ■ Dosatron water powered proportional dosing unit ■ injection rate adjusting ring ■ water supply, connection 1/2» male thread ■...
INSTALLATION (Cont...) ADJUSTING THE INJECTION RATE (with pressure off) FOR THE ADJUSTABLE MODELS Take off the protection caps from the HU1’s inlet and outlet (see page 10) IMPORTANT ! Use no tools before connecting to the water supply, then install the fi lling kit (ACH) or the spray gun assembly (CMP063 delivered as an option).
Operate the unit by positioning the operating lever on position « ON » (open Unscrew the 2 pipe fi xing rings (1 and 2). the spray gun if the HU1 connected to the spray gun assembly) until the Remove the dosing unit from its support by spreading its arms in order to product to be dosed has been sucked up and filled the injection part (visual disengage the 4 lugs on the pump body from the holes in the support (3 and 4).
Need help?
Do you have a question about the HU1 and is the answer not in the manual?
Questions and answers