Table of Contents
Advertisement
3.2
Technical Data
Table 3-1: Technical data
Dimensions
Noise level
Weight
Voltage
Power
Max. Working Pressure
Air Flow Capacity
Filter Area
Filtration Efficiency
Hose Diameter
Hose Length
4
Fume Eliminator Operation
4. 1
See Figure 2 page 5
FE840 PLUS (Manual)
Switch (3) to ON position. The unit will work continuously.
5
Maintenance
Installation, repair and maintenance work must be completed by qualified
personnel using only original Nederman spare parts. Please contact your
nearest authorized distributor or Nederman for advice on technical service.
NOTE!
The service intervals in this chapter are based on the unit being professionally
maintained.
5. 1
Changing Carbon Brushes
WARNING!
• Remove the power cabl;e plug before perfoming any motor maintenance.
• The carbon brushes are to be replaced by a qualified electrician. Instructions
for proper fitting are included with every brush set.
Nederman Customer Service & Technical Support
See Figure 2 page 5
75 dB(A) ISO 11201
30 lbs (13.6 kg)
120V 60 Hz
1.3 hp (1 kW)
64 in. w.g. (16 kPa)
88 cfm (150 m
54 ft
(5.3 m
2
F9 - W3 - MERV 14 - 99% (carbon reinfoced nanofiber)
1-3/4" (45 mm)
8.2 ft (2.5 m)
Risk of personal injuries.
techsupport.us@nederman.com
840 NANO
/h)
3
)
2
7
Fume Eliminator
+1 (336) 821-0800
Advertisement
Table of Contents
