Download Print this page

Panasonic C1381 Service Manual page 6

Color computer display

Advertisement

5-2. Input Signals
5-2-1,
5-2-2.
5-2-3.
Note:
Video Signal
Polarity:
Positive
Signal level:
Analog 0.7Vp-p/75 ohm
Horizontal Synchronization Signal
Polarity:
Positive/Negative
Signal level:
TTL level separate sync
Frequency :
30 kHz to 37 kHz continuous.
Auto size and center at 31.5 kHz,
35.2 kHz VGA/SVGA/8514A
standards.
Vertical Synchronization Signal
Polarity:
Positive/Negative
Signal level:
TTL level separate sync
Frequency:
50 Hz to 90 Hz continuous.
Non Interlaced or Interlaced modes.
Auto size and center for VGA/
SVGA/8514A standards.
The
monitor
detects
vertical
&
horizontal
sync
polarity
and? automatically
select
its polarity
and
frequency.
5-3. Signal Timing
See figures on page 8.
5-4. Video Output
Amplifier response
The video amplifier produces a drive signal at the
cathodes
of the
CRT
of sufficient
amplitude
to
produce a spot luminance with rise and fall times of
less than 12 nsec. from 10% to 90% pulsed level,
Cathode
voltage is 30Vp-p./Signal source is 75
ohm
impedance
and oscilloscope impedance
is
5pF,1M ohm.
6. OPTICAL
CHARACTERISTICS
6-1. Image Test Condition
Character:
All 'H" character
Color:
White
Brightness control:
© Max.(without background)
Contrast control:
Max.
View direction:
Parallel to the CRT axis
Ambient
Supply voltage:
Room temperature
220V AC, 50 Hz
temperature:
Terrestrial
Horizontal field...0.0 Gauss
Vertical field....... 0.2 Gauss
magnetism:
Note:
All measurements
shall be made
under normal
conditions
after an
initial warm-up
time of 20
minutes,
Note:
A normal
condition
is when
the monitor
pro-
duces the desired test image.
The conditions of the items are normal unless
( otherwise stated.
6-2. Image
6-2-1.
Image size
Horizontal:
9.65 + 0.39 in. (245+ 10 mm)
Vertical:
7.20
£ 0.28 in, (183 + 7 mm)
6-2-2,
Image position
6-2-3.
Cc
Mask
opening
B
Edge line
of the
image
D
1A — BI S 0.236 in. (6 mm)
IC — DI S 0.236 in. (6 mm)
Figure 5 Image Position
Distortion
(A)
Pincushion
a,b <_ 0.098 in. (2.5 mm)
*
c,d < 0.098 in. (2.5 mm)
Input signal is a crosshatch pattern.
Figure 6 Pincushion Error
Fy

Advertisement

loading