Table of Contents
Advertisement
Battery Check
Symbols in the LCD
Panel
@u
: Battery power sufficient.
ca
: Have a new battery handy.
: Replace the battery.
SEE blinking): See p. 55.
e When not using the camera, always be
sure to set the command dial to
prevent battery drain due to accidental
pressing of the shutter button.
e Always check the battery condition be-
fore taking pictures.
e Carry a spare battery when going on
trips or when planning to take many
pictures.
See p. 48 for shooting capacity.
1) Remove the rear lens cap by turning it
counterclockwise.
2) Remove the body cap by turning it coun-
terclockwise
3) Align the lens' red dot to the camera's
red dot and turn the lens clockwise un-
til it stops and locks with a click,
e To remove the lens, turn the lens
counterclockwise while pressing the
lens release button,
4) Set the lens' focus mode switch to AF.
5) Remove the front lens cap
The electronic contacts must be clean
for proper connection. Do not touch
these contacts.
*Do not set the lens on its rear end
without the lens cap attached to pre-
vent
damage
to
the
electronic
contacts.
Advertisement
Table of Contents
