Lancaster Mid-Century Table Base Assembly Instructions

30" x 30" Bar Height Table
Mid-Century Table Base
A S S E M B LY I N S T R U C T I O N S
PA R T S L I S T:
Side Legs 2/PCS
A
S T E P 1
Lay 1 side leg (A) on a smooth, clean surface.
Take 1 cross bar (B) and align with holes
on the top bar of side legs. Using the allen
wrench (G), secure with 4 bolts (E). Do not
fully tighten until step 4. Repeat for the
second cross bar, do not fully tighten.
S T E P 2
Stand side legs up and align side legs (A) with the
other end of the cross bars (B). Using the allen
wrench (G), secure both cross bars to both side
legs with 4 bolts (E) per connection as shown
below. Do not fully tighten until step 4.
M I D - C E N T U R Y TA B L E B A S E • A S S E M B LY I N S T R U C T I O N S
B Cross Bars 2/PCS
2
Bolts 20/PCS Tabletop Screws 4/PCS
D E
NOTES:
1. Inspect all pieces for damage before assembly. Do not assemble if any pieces are broken or
damaged. Ensure you have all required pieces before assembly.
2. Check tabletop screw length to verify compatibility with chosen tabletop.
3. Phillips head screwdriver (not included) needed to attach tabletop (power drill is optional).
A
A
B
C Connector Bar 1/PC
F
D
A
F
B
B
W W W . L A N C A S T E R TA B L E A N D S E A T I N G . C O M W W W . L A N C A S T E R TA B L E A N D S E A T I N G . C O M
Allen Key 1/PC
B
D