Table of Contents
Advertisement
÷
÷
Connecting
a DTV receiver
/ set4op
box with
ComorStream ® (component
video)
and a VCR
This connection allows you to watch DTV (digital TV), VCR, and TV
programs, and record DTV and TV programs.
Your TV has ColorStream +_ (component video) inputs. Connecting your
TV to a DTV receiver with component video can greatly enhance
picture quality and realism.
From Antenna
Stereo VCR
From DTV
Antenna
COLO£
COLOR
STREAM STREAM
You will need:
,, three coaxial cables
,, two sets of standard A/V cables
,, one set of standard audio cables
,, one set of component video cables
Note:
You can connect the component video cables
to either set of CotorStream jacks on the TV
(HD- 1 or HD-2.) For HDMt connection see
page 14.
The CotorStream HD-1 and HD-2 jacks and
HD Mt jacks can b e us ed with Progressive
(480p, 720p) and Interlaced (480L 1080i)
scan systems. A 1080i signal wilt provide the
best picture performance.
ff your DTV receiver does not have compo-
nent video, use the S-video and standard
audio connections instead. Do not connect
both an S-video and a standard video cable
to VIDE01 (or WDE02) at the same time or
the picture performance
wit/be unacceptable.
The unauthorized
recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subiect you to
civil and criminal liability.
÷
DTV Receiver
with Component
video
11
J3U00121A(E)
P07-15
11
_
10/03/2005,
6:17 AM
Advertisement
Table of Contents
