Ninja CREAMi Breeze NC100 Series Quick Start Manual page 2

SCAN & WATCH
HOW IT WORKS
ninjacreami.com
Perfectly personalized ice cream
PREP: 5 minutes | FREEZE: 24 hours | PROGRAM TIME: 1
INGREDIENTS
1 tablespoon ( / ounce) cream cheese
1
2
/ cup granulated sugar
1
3
/ cup heavy cream
3
4
PICK YOUR FLAVOR
Cocoa powder Vanilla extract
MAKE IT DAIRY-FREE Use vegan cream cheese for cream cheese, unsweetened coconut cream
for heavy cream, and unsweetened oat milk for milk. Whisk the coconut cream until smooth,
then add the remaining ingredients.
Microwave the cream Slowly mix in heavy
cheese for 10 seconds. cream and milk until
sugar is dissolved.
Add sugar and flavor,
then whisk the mixture
until it looks like frosting.
PICK YOUR MIX-INS TO ADD A PERSONAL TOUCH
/ cup of your favorite crushed candies, frozen fruits, chopped nuts,
1
4
chocolate pieces, and more.
With a spoon, create a 1
wide hole that reaches the
bottom of the pint.
Add mix-ins to the hole in the
pint and process again using
the MIX-IN program.
1 / minutes | MAKES: 4 servings
2
Flavoring, 1 teaspoon extract of your choice
OR 2 tablespoons of cocoa powder
1 cup whole milk
/ cup of your favorite mix-ins (optional)
1
4
Mint extract Almond extract Fruit extract
Pour base into Remove storage lid
CREAMi Breeze™ Pint. from frozen pint.
Place storage lid on
Refer to next page for
pint and freeze for
Assembly & process
24 hours.
instructions.
Select ICE CREAM.
/ -inch
1
2
Assembly & process
1.
2.
Plug in Prepare
unit first CREAMi
Breeze™ Pint
The unit will not run
if the CREAMi Breeze
Remove storage lid from
Pint is installed
frozen CREAMi Breeze
before the unit
Pint and check that the
is plugged in.
ingredients have not been
frozen at an angle.
If the install light is blinking and the power light is solid, make sure the pint is properly installed,
and the lid is fully secured. This can be verified by ensuring that the arrow on the processing lid
is aligned with one of the arrows on the pint. If both the power light and install light are flashing,
make sure the paddle is installed in the processing lid.
5.
Install CREAMi Breeze Pint Select program
Insert the CREAMi Breeze Pint into Press the power button,
the motor base. Rotate clockwise then press the program
to lock, until you hear a click. that suits your recipe.
8.
If adding mix-ins, use a
Remove spoon to create a 1
wide hole that reaches the
Processing Lid
Rotate processing lid
Add chopped or broken
counterclockwise
mix-ins to the hole in the
to separate from
pint and process again
CREAMi Breeze Pint.
using the MIX-IN program.
3.
Install Install
Creamerizer™ Paddle Processing Lid
Press and hold the paddle Position the processing lid
latch on the top of the on top of the CREAMi Breeze
processing lid, then insert Pint. Twist the lid clockwise
to secure pint. This can be
the paddle in the bottom of
the processing lid. Release the verified by ensuring that the
latch to secure the paddle. arrow on the processing lid
is aligned with one of the
arrows on the pint.
Release Button
To remove the pint,
press and hold
release button.
6. 7.
Remove CREAMi Breeze Pint
When the program ends,
press the release button on
the front of the motor base to
remove the CREAMi Breeze Pint.
OR
9. If not adding mix-ins,
/ -inch RE-SPIN can be used on
1
2
a crumbly or powdery
bottom of the pint. pint to make it creamy.
RE-SPIN is often needed
for very cold bases.
Do not RE-SPIN before
using MIX-IN program.
4.