Table of Contents
Advertisement
en Programme counter
15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press Start/Reload
2.
same time, turn the programme
selector to position 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 33
To change the value, press Finish
4.
in .
To save the changes, switch off
5.
the appliance.
Programme counter
16 Programme counter
The program counter displays the
Programme counter
number of finished programmes.
16.1 Calling up the pro-
gramme counter
Set the programme to position 1.
1.
Press Start/Reload
2.
programme to position 2 at the
same time.
Set the programme to position 5.
3.
34
and, at the
and set the
Cleaning and servicing
17 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
▶
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
▶
every operation with the door
open, and leave the detergent
drawer to dry.
Run the Drum Clean
▶
gramme without laundry but with
washing powder that contains oxy-
gen bleach or a a cleaning agent
for caring for the inside of the ap-
pliance.
→ "Accessories", Page 28
17.2 Cleaning the detergent
drawer
Pull out the detergent drawer.
1.
pro-
Advertisement
Table of Contents
