Mitsubishi Electric MUZ-LN50VG2-EVR2 Service Manual page 97

13-6. MUZ-LN60VG2
NOTE: Turn OFF the power supply before disassembly.
OPERATING PROCEDURE
1. Removing the cabinet
(1) Remove the screws of the service panel.
(2) Remove the screws of the top panel.
(3) Remove the screw of the valve cover.
(4) Remove the service panel.
(5) Remove the top panel.
(6) Remove the valve cover.
(7) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(8) Remove the screws of the cabinet.
(9) Remove the cabinet.
(10) Remove the screws of the back panel.
(11) Remove the back panel.
Photo 2
Screws of the top panel
Screws of
the cabinet
Screws of
the service
panel
Screw of
the valve cover
OBH767G
Photo 1
Screws of
the cabinet
Screws of the
back panel
97
PHOTOS/FIGURES
Screws of the top panel
Screws of
the cabinet