Display; Standby Mode; Start; Quick Start/Add 30 Seconds - KitchenAid KMCS122PPS Series Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

Display

When power is first supplied to the microwave oven, "12Hr" will
appear in the display. User can press Timer/Clock button or
+/- button to toggle between 12Hr or 24Hr within 10 seconds.
Press Start button to confirm. If the "12:00" appears in the
display at any other time, a power failure has occurred. Reset
the clock if needed. See the "Clock" section.

Standby mode

When no functions are being used, the microwave oven will
switch to Standby mode.
The Start button begins any function. If non-sensor cooking
is interrupted by opening the door, pressing Start button will
resume the cycle.
NOTE: To avoid unintentional operation of the microwave oven,
a cooking function cannot be started if the microwave oven door
has been closed for about 1 minute. The word "door" will appear
in the display until the door is opened and closed.

Quick start/Add 30 seconds

In standby mode, pressing Start button automatically starts the
microwave oven at 100% power for 30 seconds and adds
30 seconds of cook time, with each additional touch of the
control. Time may be added to any manual cooking cycle in
30 second increments, at the moment power level, by pressing
Start button during cooking.

Cancel

The Cancel button clears any incorrect command and cancels
any program during cooking. Press the Cancel button to cancel
the cycle. It will not erase the time of day.
The microwave oven will also turn off when the door is opened.
Close the door and press Start to resume the cycle. The Cancel
button is also used to lock and unlock the control panel. See the
"Control Lock" section.

To use Non - Sensor Menu

(Popcorn, Potato)
1. Place food on the turntable and close the door.
2. Touch desired menu control. The first programmed amount
will appear in the display. Touch control keypad repeatedly or
touch number keypads to change quantity.
3. Touch Start. When the cycle ends, "End" will appear in the
display and the end-of-cycle tone will sound.
4. Touch Cancel or open the door to clear the display.
To Set:
The microwave oven must be in standby.
1. Press Timer/Clock button for 3 seconds to enter clock
setting. It will also appear every time the product is plugged
into the power source, or power is back after a power fail.
2. Press +/- button to set the hour.
3. Press Start button to confirm.
4. Press +/- button to set the minute.
5. Press Start button to confirm the setting.
10

Start

Clock

To Set:
1. Press Timer/Clock button
2. Press +/- button to enter desired time.
3. Press Start button. When the set time ends, the
end-of-timer.
4. When the Timer countdown is achieve in the display, tone
will sound. Press Cancel to cancel the timer.
NOTE: The Timer does not start or stop the microwave oven.
The function can be set only in Standby mode.

Tones ON/OFF

This function allows the user to activate/deactivate all the
sounds played by the appliances, includes button press,
warnings, alarm, even end audio feedback.
Press Steam Clean button and hold for 5 seconds to put into
mute, hold the button again for 5 seconds to turn on the sound.

Control Lock

The Control Lock disables the control panel keypads to avoid
unintended use of the microwave oven.
To Lock/Unlock Control: The microwave oven must be OFF.
Touch and hold Cancel button for about 3 seconds, until the
tone sounds and the Lock icon appears in the display. Repeat to
unlock and clear the display.
If any cook function control is touched while the Control Lock is
active, a tone will sound.

Cooking End

When the cooking is finished, the display will show the text
"End". A reminder acoustic beep will signal.

To use Sensor Menu

(Reheat, Cook Menu)
1. Place food on the turn table and close the door.
2. Touch the desired menu control.
3. Touch Start, the running segment animation will appear
in the display. The microwave oven will start and sensor
cooking will begin.
The running segment will remain in the display until the
sensor has determined the remaining cook time.
4. When the cycle end, "End" will appear in the display and the
end-of-cycle tones will sound.
5. Touch Cancel or open the door to clear the display.
(NOTE: Sauce, Soup, Beverage in Reheat Menu without using
Sensor cooking).

Timer

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kmcs122pbs series

Table of Contents