Advertisement
Quick Links
Advertisement
Related Manuals for Bymat Brushline 1150 RS
Summary of Contents for Bymat Brushline 1150 RS
- Page 1 User manual 1120 RS / 1130 RS / 1140 RS / 1150 RS...
-
Page 2: Description Of The Device
Neusser Strasse 106 D - 41363 Jüchen Tel .: +49 (0) 21 65/87 28 - 0 Faks: +49 (0) 21 65/87 28 - 28 www.bymat.de / www.bymat.com email: info@bymat.de Your contact: Internal Sales / template orders: Mrs. Beate Hoenen Tel.: +49 (0) 21 65 / 87 28 -0... -
Page 3: Features & Specifications
FEATURES / SPECIFICATIONS: 1120 RS 1130 RS 1140 RS 1150 RS Cleaning Polishing Embossing dark Embossing light Fixed voltage General Data Dimensions 295x145x230 360x185x295 435x215x350 435x215x350 W x H x L in mm Weight (Kg) 11,9 17,2 23,5 Rating 800 VA 800 VA 1200 VA 2500 VA... - Page 4 Remove the electrolyte of the entire metal surface and neutralize the surface with a cloth soaked in Neutralizer. Tips for optimal cleaning The BYMAT brushes are ideal for cleaning hard-to-reach areas. The short brush makes it easier to get into sharp corners and around fine detail. The longer brush is better for cleaning large areas.
- Page 5 User manual Bymat 1130 RS The Bymat 1130 RS machines are designed to be used for the cleaning and polishing of stainless steel welds and the embossing of stainless steel and other conductive materials. All persons using this equipment should familiarize themselves with these instructions before using the equipment.
- Page 6 Polishing Switch the machine on by means of the switch located on the back of the machine Turn the 3 position switch on the front of the machine to position number 2: 14 volts will be displayed on the meter also located on the front of the machine. The brush is connected using the accompanying black cable to the black connector of the machine.
- Page 7 Embossing dark For this please use the embossing stamp with 90-degree anode (Art.-no.: 5025 ST) Cover the carbon anode with a white felt strip and fasten with an O ring Switch the machine on by means of the switch located on the back of the machine Turn the 3 position switch on the front of the machine to position number 3: 12 volts will be displayed on the meter also located on the front of the machine.
- Page 8 User manual Bymat 1140 RS / 1150 RS The Bymat 1140 RS / 1150 RS machines are designed to be used for the cleaning and polishing of stainless steel welds and the embossing of stainless steel and other conductive materials.
- Page 9 Polishing Switch the machine on by means of the switch located on the back of the machine Turn the 3 position switch on the front of the machine to position number 2: 14 volts will be displayed on the meter also located on the front of the machine. The brush is connected using the accompanying black cable to the black connector of the machine.
- Page 10 Embossing dark For this please use the embossing stamp with 90-degree anode (Art.-no.: 5025 ST) Cover the carbon anode with a white felt strip and fasten with an O ring Switch the machine on by means of the switch located on the back of the machine Turn the 3 position switch on the front of the machine to position number 3: 12 volts will be displayed on the meter also located on the front of the machine.
- Page 11 In other countries, please contact the dealer where you purchased the product. The Bymat warranty states that, at the time of delivery, The product is free from material defects and that the machine (excluding consumables e.g. cable, stamp etc.) is guaranteed for the original purchaser for a period of two years from the date of original purchase.
- Page 12 Parts and Accessories The devices are intended only for the electrochemical cleaning and polishing welds, removing oxide layers at weld seams, for light and dark embossing of electrically conductive surfaces and electroplating / metal deposition. The function is only guaranteed with original accessories. Any other use beyond this is not regarded as the intended purpose.