Getting The Most Out Of Dolby Pro Logic Surround Sound - Sony RDS EON STR-DE515 Operating Instructions Manual

18%
Using Surround Sound
a ae ee eee
Getting the Most Out of Dolby
Pro Logic Surround Sound
To obtain the best possible Dolby Pro Logic Surround
sound, first select the centre mode according to the
speaker system you have. Then, adjust each speaker
volume and delay time.
Note that you must have at least one additional pair of
speakers and/or one centre speaker to do the following
adjustments.
SET-UP SURROUND ON/OFF
CENTER LEVEL +/-
REAR EFFECT/DELAY TIME surround
LEVEL +/~ MODE
SURROUND
SURROUND
ON/OFF
| |
MODE
SS
DELAY TIME TEST TONE
REAR
LEVEL +/-
CENTER
LEVEL +/-
Selecting the centre mode
The receiver offers you four centre modes: Phantom, 3
Channel Logic, Normal, and Wide. Each mode is '
designed for a different speaker configuration. Select
the mode that best suits your speaker's system
configuration:
1
Press SURROUND ON/OFF to turn on surround
sound.
2 Press Surround MODE repeatedly to select the
Dolby surround sound field (PRO LOGIC or
C.STUDIO mode).
3 Press SET-UP repeatedly until the centre mode
you want appears in the display. Select the centre
mode as follows:
If you have Select So that
Front and rear PHANTOM The sound of the
speakers, no centre channel is
centre speaker output from the front
speakers.
Front and centre 3CH LOGIC The sound of the rear
speakers,no rear (3 Channel channel is output
speaker Logic) from the front
speakers.
Front and rear NORMAL The bass sound of the
speakers, and a centre channel is
small centre output from the front
speaker speakers (because a
small speaker cannot
produce enough
bass).
Front and rear WIDE For "complete"
speakers, and a
large centre
Dolby Pro Logic
Surround sound.
speaker
(continued)