Sharp KD-NCB8S7PS91-EN User Manual page 28

PROBLEM
Water leaking from the loading door.
The loading door opens on its own.
The water tank warning symbol is
on/flashing.
The condenser cleaning warning
symbol is on.
The filter cleaning warning
symbol is on.
The program can not be started and
the filter warning led is blinking
The program can not be started and
both condenser and filter warning
leds are blinking
REASON
There might be lint accumulated on
the inner surfaces of the loading
door and on the surfaces of the
gasket of the loading door.
The loading door might not be
closed properly.
The water tank might be full.
The water discharge hose might
be bent.
The condenser might be unclean.
The lint filter might be unclean.
The filter seat might be clogged
by lint.
There might be a layer that causes
obstruction on the surface of the
lint filter.
The filter seat might be clogged
by lint.
There might be a layer that causes
obstruction on the surface of the
lint filter.
The condenser may not be placed.
The condenser and filter may not
be placed.
The filter and condenser warning
leds are blinking even though the
filter and condenser are placed.
EN - 24
SOLUTION
Clean the inner surfaces of the
loading door and the surfaces of the
gasket of the loading door.
Push the loading door until you hear
the closing sound.
Empty the water tank.
If the product is connected directly
to the water outlet, check the water
discharge hose.
Clean the condenser.
Clean the filter.
Clean the filter seat.
Wash the filter with lukewarm water.
Clean the filter seat.
Wash the filter with lukewarm water.
Replace the condenser.
Replace the filter and condenser.
Call technical service.