Advertisement
Quick Links
SP-1002D
1x2 Dual Link DVI Distribution
Amplifier
User Manual
The SP-1002D
safety regulations and requirements, and has been certified for international use. However, like all
electronic equipments, the SP-1002D should be used with care. Please read and follow the safety
instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
● Follow all instructions and warnings marked on this unit.
● Do not attempt to service this unit yourself, except where explained in this manual.
● Provide proper ventilation and air circulation and do not use near water.
● Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
● Use only the power adapter and power cords and connection cables designed for this unit.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
TABLE OF CONTENTS
INTRODUCTION................................................................................................................. 1
FEATURES ......................................................................................................................... 1
PACKAGE CONTENTS ...................................................................................................... 1
SPECIFICATIONS .............................................................................................................. 2
PANEL DESCRIPTIONS ..................................................................................................... 3
HARDWARE INSTALLATION ............................................................................................. 4
CONNECTION DIAGRAM .................................................................................................. 4
WARRANTY ....................................................................................................................... 5
rev: 150812
Made in Taiwan
Safety and Notice
1x2 Dual Link DVI Distribution Amplifier
has been tested for conformance to
Advertisement
Related Manuals for Gomax SP-1002D
Summary of Contents for Gomax SP-1002D
- Page 1 However, like all electronic equipments, the SP-1002D should be used with care. Please read and follow the safety 1x2 Dual Link DVI Distribution instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
- Page 2 DVI splitter solution on the market, by which the super high definition graphics can be Technical transmitted to 2 different locations without losing quality. SP-1002D is also good to be used as a typical Role of usage 1x2 Dual Link DVI distribution amplifier (Splitter) single link 2 port DVI splitter.
- Page 3 PANEL DESCRIPTIONS HARDWARE INSTALLATION 1. Connect the output display to DVI output2 Rear Panel 2. Adjust the DIP switch to EDID Learning Mode [ON,ON] (,) 3. Plug out and then plug in the power adapter 4. The power indication LED will start flicking 5.
- Page 4 The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the SP-1002D features and specifications is subject to change without further notice.
Need help?
Do you have a question about the SP-1002D and is the answer not in the manual?
Questions and answers